Liaoning MEC Group Co. Ltd

Model Number: mec-k01-101 explosive truck Brand Name: Longem. Key Specifications/Special Features: Widely used in metallurgy, coal, chemicals, building materials and other departmentsLarge and medium sized open pit is conducted with water hole blasting operationHole diameter is more than 100mmEmulsified explosive truck with on-site mixing loading of BCRH line can mix pure emulsion explosives and series emulsion explosive with 30% of dry mix at most on-sitePreparation of aqueous phase, oil phase and sensitizer is operated on ground station, while latex matrix emulsion can be completed on the ground, or in truck

Dry material mixture and sensitization is conducted in truck

Before charging, at ground station, relevant materials should be added into corresponding container in the truck

When loading truck comes to job site, start PTO, stretch charging tube into bottom of the hole, input explosive load on counter and press start button

Then, each preparation and mixing unit begins to work

Slowly raise charging tube

Explosive is charged below water, and water is discharged from hole

After charging, move to the next hole, repeat the above procedure, and charge the next hole

Charging effectiveness 200-280kg/min

Currently, there are 5 specifications, 8T, 12T, 15T, 20T, 25T

Measurement error ≤±2%